CLIPS
Suitable also for wall and ceiling mount (for this please confer with our product management) -B=bore diameter for fixing screw
TYPE PIPE CLAMP | SUITABLE FOR PIPE DIAMETER MM |
AnZ 101 | 16 |
AnZ 101 | 20 |
AnZ 101 | 25 |
AnZ 101 | 32 |
AnZ 101 | 40 |
AnZ 101 | 50 |
AnZ 101 | 63 |
AnZ 101 | 75 |
AnZ 101 | 90 |
AnZ 101 | 110 |
AnZ 101 | 125 |
AnZ 101 | 140 |
AnZ 101 | 160 |
Pipe Clip with Locking Strap
The design is modular: you have the U-clip body and a matching Spannbügel (tensioning/locking strap) that secures the pipe.
- Material Specifications
- Material: Polypropylene (PP), high-impact resistant.
- Color: Dust Grey (RAL 7037).
- Operating Temp: 0°C to +90°C (Industrial grade).
- UV Resistance: High; however, for permanent outdoor use, AnZ datasheets recommend UV-stabilized versions or shielding to prevent brittleness over decades.
- Technical Dimensions (Standard Type)
clips use a single-bolt mounting system for sizes up to d90 and a triple-bolt base for sizes d110 and above.
Key Design Features
- Retaining Strip: Unlike simple snap-clips, the locking strap is a semi-rigid piece that clicks into deep notches on the outer arms of the clip. This creates a closed-loop support.
- Axial Movement: The internal diameter is precisely calibrated to support the pipe without “pinching,” allowing the pipe to expand and contract axially due to thermal changes (sliding support).
- No “Notch Effect”: The smooth internal radius ensures no stress concentration on the PP pipe wall, which is critical for long-term pressure ratings.
- Installation Guidelines
- Mounting: Suitable for wall, floor, or ceiling mounting.
- Vertical Lines: The locking strap is mandatory for vertical installations to prevent the pipe from slipping out of the U-channel under gravity or hydraulic surge.
- Ceiling Mounting: When mounting overhead, the load capacity of the clip is reduced by approximately 50%. Always ensure the locking strap is fully engaged (you should hear a distinct “click”).
- Chemical Resistance
Because they are made of PP, clips are virtually immune to:
- Salts and Aqueous solutions.
- Most inorganic acids (Hydrochloric, Phosphoric).
- Alkalis (Sodium Hydroxide).
- Note: Avoid use with strong oxidizing agents (Nitric Acid) or halogens.
Technical features:
- Corrosion resistant
- Integrated distance plate (Type B)
- Easy assembling
- Long lifetime
Pipe clip spacing
The recommended pipe clip spacing is based on DVS 2210-1 at a density of the fluid of 1 g/cm3.
The following parameters have an influence on the pipe clip spacing:
- pipe material
- pipe diameter
- pipe wall thickness
- average pipe wall temperature
- density of fluid
Due to DVS 2210-1 the following conversion factors can be used to determine the pipe clip
spacing if the fluid has another density than 1 g/cm3:
PP Pipe Clip: Technical Specifications
These clips are manufactured from High Impact Copolymer Polypropylene (PP), specifically designed for industrial chemical resistance and UV stability.
- Classification by Type
- Type A: Standard open U-clip for small diameters (d10 – d32).
- Type B (The “Locking” Choice): Features an integrated distance plate and a reinforced structure that accommodates a safety locking strap (d16 – d63).
- Type C & D: Heavy-duty series for larger pipes (d25 – d400), featuring pre-molded holes for securing the pipe with a bolt or strap.
- Key Performance Features
- Chemical Resistance: Suitable for aggressive media (acids/bases) in accordance with PP-H material properties.
- Temperature Rating: Optimized for use up to 80°C & 176°F
- Self-Locking Design: Anz industrial clips are marketed as “self-locking” because the U-arms are engineered with a specific tension that “snaps” the pipe into place, while the safety strap provides secondary mechanical retention.
- Corrosion-Free: 100% plastic construction (unless stainless steel mounting bolts are added by the user).
- Support Spacing for PP Pipes at 20°C
Based on our technical handbook, when using these clips with PP-H pipes, follow these maximum intervals to prevent sagging:
- d20: 850 mm
- d32: 1050 mm
- d63: 1450 mm
- d110: 1900 mm
Note: If the fluid density is higher than 1.0 g/cm3 (e.g., concentrated chemicals), reduce the spacing by the density factor (e.g., divide by 1.2 for a 1.2 SG fluid).
- Application Note: “Safety Straps”
While the clip body is the primary component, the safety strap (often a UV-stabilized Velcro or a PP notched strap) is frequently listed as an accessory for the Type B and C clips to provide the final “lock” required for vertical lines or ceiling mounts.
The U-type lock clip is a type of locking mechanism used in various applications, including industrial settings. It is designed to be durable and resistant to chemicals, making it suitable for use in harsh environments. For more detailed specifications and applications, you can refer to the HDPE specification manual, which includes information on their polyethylene drainage products. Additionally, you can find U-type lock clips manufactured by suppliers like Spring India, which offer high-quality options for industrial applications.
Pipe Clip: Technical Data
These clips are typically used with PPH (equivalent) or PVC systems.
- Material & Performance
- Body Material: High-grade Polypropylene (PP-H).
- Color: Usually Black (UV stabilized).
- Thermal Range: (standard for industrial PP).
- Design: Features a “snap-on” safety strap that bridges the top of the U-opening.
2.Key Installation Features
- Safety Strap: The locking strap is often sold as part of the assembly or as a separate accessory. It prevents the pipe from “jumping” out of the bracket due to water hammer or thermal expansion.
- Centring Guides: The internal radius of the U-clip is precision-molded to match the pipe OD, ensuring that the pipe remains on the centreline of the system (essential for alignment).
- Stackability: Many AnZ clips feature a base design that allows them to be mounted on distancing spacers (type DS) to increase the clearance between the pipe and the wall.
- Support Spacing (PP-H)
When using these clips with PP-H piping at 20°C, the recommended maximum support intervals are:
- d20: 800 mm
- d32: 1000 mm
- d63: 1400 mm
(Note: Spacing must be reduced by approximately 30% if operating at 60°C).
- Difference
- Locking Mechanism: The typically “clicks” into a small external lug on the outside of the clip arm, whereas some versions use a slide-through pin or a top-down snap.
Model:
- Material: Clip and safety clip PP black, UV resistant, bolts galvanized
- d16 – d63: Height designed
- Minimum order quantity: standard packaging’s SP
The U-type lock clip is designed for securing pipes and is compatible with various materials, including PVC-U. Here are some key points:
Material Compatibility: U-type lock clips are suitable for securing pipes made from PVC-U and other thermoplastics.
Durability: These clips are known for their resistance to chemicals and are manufactured using spring steel, making them durable and safe for industrial applications.
Applications: They are commonly used in various piping systems, including those for chemical and water conveying.
For more detailed specifications, you may refer to the manufacturer’s datasheets or product documentation.
Pipe Clip:
the standard “U-style” clip that features an optional or integrated locking strap (safety clip) to prevent the pipe from popping out due to vibration or thermal expansion.
- Material Specifications
- Clip Body: Polypropylene (PP), usually black and UV-stabilized for outdoor and industrial environments.
- Safety Clip (Locking Strap): Polypropylene (PP), black.
- Chemical Resistance: High resistance to most acids, alkalis, and solvents (standard PP-H properties).
- Locking Mechanism
The “locking” feature is achieved through a safety clip (safety bar) that snaps across the top of the U-opening.
- Tool-free installation: The pipe is pushed into the U-clip, and the safety strap is clicked into the notched arms.
- Vibration Security: Once the safety clip is engaged, the pipe cannot be removed without manually unlatching the strap, making it ideal for vertical runs or high-flow turbulence.
Pipe Clips for Reliable Piping Support in UAE
Pipe support is crucial to any plumbing, industrial, water treatment, chemical processing, or MEP installation. Pipes must be maintained in correct alignment, firmly supported, and properly mounted for the duration of the pipe’s service life. To keep pipes in place on walls, floors, and ceilings while maintaining the safe and efficient operation of the piping system, high-quality pipe clips are a good solution.
Anz Waters offers pipe clip solutions for thermoplastic pipe applications. The range also covers clip designs for various pipe diameters and installation needs. Depending on the project requirements and technical specifications, these clips can be used with different types of piping systems, such as PVC and PP-based ones.
When choosing a pipe clips supplier UAE, it’s not just about picking a diameter that will fit your needs. Pipe supports should be chosen based on a variety of factors, including material, pipe type, operating temperature, mounting position, support spacing, chemical exposure, and installation conditions.
Why Are Pipe Clips Important?
Pipe clips are intended to hold pipe in place where it is needed. If not supported properly, pipes may move, sag, vibrate, or misalign. These can cause a piping system to perform and/or last suboptimally.
The correct type of pipe clips provides uniform pipe alignment, as well as support for pipe and fluid load. They can also compensate for normal thermal movement of thermoplastic piping systems.
Piping on industrial installations might be subjected to chemicals, temperature fluctuations, vibration, pressure fluctuations, and continuous use, making pipe supports especially important. Appropriate clips can aid in a more organized and reliable installation.
The clip solutions of AnZ Waters include corrosion resistance, easy assembly, integrated distance plates, long service life, etc. The clips should always be selected depending on the pipe material, diameter, application, and installation environment.
Pipe Clips for PVC Pipes in Dubai
PVC pipe is used across the board in water management, plumbing, industrial, and utility applications. Choosing the right PVC pipe clips in Dubai can ensure correct pipe positioning and contribute to the overall pipe installation process.
PVC pipes can experience dimensional changes when exposed to temperature variations. Hence, the pipe supports should be chosen and installed so as to provide support without interfering with the natural motion of the pipe.
Pipe diameter, installation direction, operating temperature, the density of the fluid, and the distance between supports are some of the factors to consider when selecting PVC pipe clips in Dubai.
A good clip system can be used to help center and align PVC piping in horizontal and vertical runs. Locking mechanisms or safety straps may be necessary for vertical installations for added security.
Designed to offer support solutions based on pipe size, AnZ Waters’ clips come in a variety of sizes. There are products for various pipe diameters, and they can be used in multiple pipe configurations.
Features of AnZ Waters Pipe Clips
Anz Waters pipe clips are engineered for the ease and functionality of industrial/commercial piping installations. Depending on the type of clip selected and the intended use, key features are:
- Polypropylene construction
- High-impact resistance
- Corrosion resistance
- Easy assembly
- Long service life
- Integrated distance plate options are available
- Locking strap compatibility
- Attach to wall, floor, or ceiling
- It supports various pipe diameters
- Appropriateness for different thermoplastic piping systems
The use of polypropylene is growing for challenging piping applications due to the ability of polypropylene to resist many chemicals and its suitability for industrial applications.
The clips can be used for stable support but allow for the correct position of pipe. Product compatibility is recommended when using with aggressive chemicals or unusual operating conditions, as indicated in the technical specifications.
Choosing the Right Pipe Clip
There are a number of technical aspects to consider when choosing a pipe clip. A clip shouldn’t be chosen according to outside diameter of pipe alone.
1. Pipe Diameter
One of the main factors to consider when selecting a clip is the pipe diameter. AnZ Waters offers a variety of sizes of clips for various pipe diameters. It is important to choose the right size to ensure the pipe is supported properly and stays centered.
2. Pipe Material
Thermal and mechanical properties of various thermoplastic materials may vary. Different support considerations may be necessary for PVC, PP, PE, CPVC and other piping materials.
The pipe should be able to be joined to the piping system to be used under the operating conditions.
3. Operating Temperature
The temperature may affect the spacing of pipe supports and the expansion/contraction of the pipe. Thermoplastic pipes will have the ability to move if the temperature changes, thus support should be provided for appropriate axial movement if necessary.
4. Fluid Density
The fluid load in the pipe constitutes a part of the pipe support system’s load. Closer support intervals might be necessary for higher-density fluids than for water-based fluids.
5. Installation Position
Pipe clips can be attached to a wall, floor or ceiling. Installations may require further support and safety for vertical installations or overhead installations.
Locking straps can offer extra securing when there is a chance of movement due to vibration, temperature changes, hydraulic pressure, or gravity.
Pipe Clip Spacing and Installation
Proper pipe support spacing can be crucial in pipe installations. Too much space can cause a pipe to sag; too little space can add unnecessary installation requirements.
Support spacing is determined by a number of factors:
- Pipe material
- Pipe diameter
- Wall thickness
- Average pipe temperature
- Fluid density
- Installation orientation
- Operating conditions
AnZ Waters technical information calls for use of DVS 2210-1 to establish pipe clip spacing, specific changes depending on the density of the fluid and other operating conditions.
For instance, pipes with larger diameters may need to be taken into account for their weight and mechanical properties. The recommended support intervals are also influenced by temperature, as thermoplastic piping expands and contracts with temperature changes.
Therefore, it is important that engineers and installers read the relevant technical documentation and the project specification before determining support spacing.
Locking Strap Pipe Clips
An extra locking strap that can be fastened on the upper portion of the clip around the pipe can offer more security. This makes it more secure than an open clip design.
Locking clips are especially helpful on vertical pipe runs and when the pipe is mounted to a ceiling or other vertical surface for extra mechanical securement.
Locking mechanism to lock pipe without compromising support. The clip system should be chosen and installed to allow the piping to move as required, while limiting the potential for excessive stresses.
The use of a locking strap must be decided on the basis of the installation requirements and applicable product specification.
In addition to this, Anz Waters provides you with a variety of related products that go along well with these solutions and suit different project needs. Take a look at the full product line of Anz Waters for more information.
Applications of Pipe Clips
Pipe clips are employed in many commercial applications, industrial applications, and in piping. Depending on the type of clip and piping material, applications may involve:
Water Treatment Plants
Pipe installations are essential for any water treatment system and must be organized and reliable. Thermoplastic pipes for water and treatment processes can be supported with pipe clips.
Chemical Industry
Piping elements can be subjected to harsh conditions in industrial chemical systems. Chemical resistance may be provided by a polypropylene-based support product, depending on material compatibility with the specific chemical and concentration.
Swimming Pools and Spas
Piping used in swimming pool and spa applications is usually thermoplastic. Pipe clips can be used to keep pipes neat and secure, arranged in equipment rooms and service areas.
MEP Installations
Large amounts of pipe routing are frequently needed for mechanical, electrical and plumbing projects. Pipe supports that are appropriate help ensure alignment and organized installations.
Industrial Piping Systems
Pipe clips can also be used to hold pipe in place for water, chemicals, utilities, and other processes in factories and processing plants.
Benefits of Working With a Pipe Clips Supplier in the UAE
Working with an experienced pipe clips supplier in the UAE makes it easier for contractors, consultants, engineers, and procurement teams to choose the right support product.
A proper supplier can help customers understand product size, materials, compatibility, installation procedures, and technical matters. This can be especially helpful if you have a large project that requires multiple pipe diameters or varied installation scenarios.
AnZ Waters offers various thermoplastic pipeline products and accessories to meet the needs of piping applications. It offers products for CPVC pipe, PVC pipe, PVDF pipe, PPH pipe, HDPE pipe, ABS pipe, and more.
If technical coordination is needed for a project, for example, choosing the appropriate support components in the project planning phase can help to minimize installation complexity and ensure consistency in the piping system.
Pipe Clips Supplier Dubai for Industrial Requirements
Dubai is a hub of construction, infrastructure, industrial, water management, and commercial development. Often, projects need reliable piping systems, suitable with support parts.
As a pipe clips supplier in Dubai, AnZ Waters offers solutions to projects where thermoplastic piping support is required. Different sizes and types of clips can fit pipes of various sizes and configurations.
Product selection should be based on the entire application and not just the price for contractors and project teams. Correct material, size, mounting technique, support spacing, and locking system can help to create a more secure installation.
AnZ Waters is able to meet the pipe support needs for new installations, maintenance projects, industrial facilities, water treatment applications and additional piping requirements.
Why Choose AnZ Waters?
AnZ Waters specializes in thermoplastic piping systems and solutions for industrial and commercial applications. It offers a range of pipeline systems, pipe fittings, saddle clamps, clips, fabrication solutions and other specialized piping products.
The company offers a variety of clip options that cater to specific installation needs, such as various pipe diameters and mounting configurations.
Some points to take into account when selecting AnZ Waters are:
- Multiple clip sizes
- Thermoplastic construction
- Corrosion-resistant design
- Industrial applications
- Easy assembly
- Locking support options
- Ability to be compatible with thermoplastic piping systems
- Support for piping requirements.
The consideration shall not be based on any one factor but shall consider the following for customers looking for the best pipe clips supplier in UAE: Product suitability, technical specifications, application needs, availability, and project support.
Frequently Asked Questions
What are pipe clips used for?
Pipe clips are used to hold pipes up and keep them in place in a permanent setup. They will help keep pipes aligned and can be placed on walls, floors, or ceilings, depending on the design of the product and the application.
Can pipe clips be used for PVC pipes?
Yes, there are appropriate clips available for PVC piping that fit the size, material, and mounting specifications of the pipe. Before choosing pipe clips for PVC pipes Dubai, it’s important to evaluate the pipe diameter and conditions under which it will be used.
What factors affect pipe clip spacing?
The recommended spacing for supports can vary depending on the pipe materials used, pipe diameter, wall thickness, operating temperature, fluid density, and installation conditions.
Are locking straps necessary?
Locking straps can be used on vertical or overhead installations to offer extra retention. Their use should be determined according to the application and technical requirements.
Get Reliable Pipe Support Solutions From AnZ Waters
The alignment, stability, and long service life of a piping system can only be maintained with a well-supported system. Whether it’s PVC pipe or other thermoplastic systems, choosing the right support parts can have a profound impact on the quality of installation.
AnZ Waters offers pipe clips that are available in various sizes and styles to fit use in industrial, commercial, water treatment, MEP, chemical, and other piping systems. When considering pipe clips for PVC pipes Dubai, looking for a pipe clips supplier UAE, or finding a trusted pipe clips supplier Dubai, it is crucial to always choose the right pipe clips design for the specific project based on its technical needs.
AnZ Waters is a leading pipe clip supplier in UAE with thermoplastic pipe support solutions that are engineered for ease of installation and challenging applications.
Call AnZ Waters to discuss your pipe clip needs and a solution for your piping project that works for you.